RSS

Accu-Chek Active Blood Glucose Meter

17 Dec

Source:http://www.accu-chek.in

Meter Highlights:

  • Accurate: Simple auto-codingTM, Strip expiry warning, Wide operating temperature & Humidity range
  • Fast: 5 seconds test time, 3 simple steps
  • Flagging: Pre Meal, Post Meal and General
  • Pain Free: Clixmotion technology and Proven least painful
  • Tiny Blood Sample 1 -2 µL, Under-dosing detection
Detailed Features:
  • Detailed data to keep diabetes management on track – The Accu-Chek Active system now offers functions to mark and evaluate the pre- and post-meal blood glucose values; the latter have moved into the focus of attention as a major independent cardiovascular risk factor over the past years. The new Accu-Chek Active system provides the option to flag these values of particular importance and thus supports a precise evaluation of the metabolic situation. Furthermore, the averages of pre- and post-meal values for the last 7, 14 or 30 days can be retrieved from the meter’s memory and displayed directly on its screen.
  • Easy-to-use data analysis function: Accu-Chek Active has a 350-value memory for saving results together with date and times as well as an infrared interface for communicating with a PC running a suitable analysis program.
  • Testing in record time: With a testing time of about 5 seconds, your Accu-Chek Active is one of the fastest blood glucose monitors available.
  • Elegant design: Your new Accu-Chek Active is designed for ergonomic functionality with good looks.
  • Tiny blood sample: Your Accu-Chek Active requires only a tiny drop of blood, 1 to 2 µL (1 micro litre = 1 thousandth of a milli litre) if you apply the blood drop to the middle of the test pad. If at any time the drop you apply is too small, the monitor will detect this and issue a warning.
  • Easy to operate: No need to press buttons when you carry out the test.
  • Integrated data evaluation: From the results stored in memory your monitor can calculate the average of your blood glucose results over the last 7 , 14 or 30 days.
  • Out-of-meter dosing: After activating the test cycle you may remove the test strip to apply blood e.g. from an earlobe, and then insert it again in the monitor.
  • Accurate results: Application of blood to the test strip start with a colour reaction. The final colour is accurately read (measured photo metrically) by the meter’s optical system and the result is converted to a blood glucose value.
  • Dependable Auto CodingTM : Each pack of test strips contains a coding chip that holds all of the important information that is needed to evaluate the strips from that particular pack. Whenever you open a new pack of strips, simply insert the new coding chip in the coding chip slot.
  • Easy-to-read display: Numbers and messages are clearly presented on a spacious display screen. Easily understood symbols give you additional information and instructions.
  • Longest Strip Expiry: Accu-Chek Active strips have 18 months of strip expiration from the date of manufacture which is the longest expiry period compared to other strips.*
  • Virtually Pain-free Testing in 5 Seconds: Things to do. Places to go. Whatever pace you live your life at, new Accu-Chek Active is with you all the way. In just 5 seconds, Accu-Chek Active delivers highly accurate results, whenever you need them. It’s the quickest, best-looking system ever. If you don’t want diabetes to slow you down, it’s definitely the way to go.

* Data on File.

Coding the Meter
    • Accu-Chek Active Blood Glucose MeterWhen coding your Accu-Chek Active meter, leave it turned off. Take the orange-coloured code chip from the pack of test strips and slide it gently into the slot on the side of the meter. Be sure to push the code chip in all the way until it clicks into place.Insert a test strip to turn on the meter.
  • Accu-Chek Active Blood Glucose MeterCompare the three-digit code number (e.g. 689) on the display with the number printed on the test strip container. The two numbers must be identical.
Testing Blood Glucose
    • Accu-Chek Active Blood Glucose MeterTurning on the meter: 
      Inserting the test strip automatically turns the meter on and puts it in test mode. Hold the test strip so that the application area and arrows are facing upwards. Gently push the test strip in the direction of the arrows into the test strip slot of your Accu-Chek Active until you hear it click into place.
    • Accu-Chek Active Blood Glucose MeterOut-of-meter dosing: 
      Pull the test strip out of the meter as soon as the drop symbol flashes in the display. You now have 20 seconds to apply blood to the test strip and re-insert it before the meter switches off.
  • Accu-Chek Active Blood Glucose MeterOut-of-meter dosing: 
    Pull the test strip out of the meter as soon as the drop symbol flashes in the display. You now have 20 seconds to apply blood to the test strip and re-insert it before the meter switches off.
Reading the Blood Glucose Result and Plausibility Check
    • Accu-Chek Active Blood Glucose MeterReading the blood glucose result: 
      In the case of “in-meter dosing” the test is complete after about 5 seconds. The result appears in the display and is automatically saved with the date and time.
  • Accu-Chek Active Blood Glucose MeterPlausibility check: 
    You have the facility for verifying the result by comparing the colour of the round control window on the back of the test strip with the colour scale on the label of the test strip container. It is important that this check is performed within 30-60 seconds after blood application.
Memory and Cleaning the Meter
    • Accu-Chek Active Blood Glucose MeterMemory: 
      Accu-Chek Active saves automatically up to 350 results in memory together with the date and time. To turn on the meter and retrieve results from memory please press the M button briefly. In the display you will see “memory” at top left and the most recent blood glucose result. Press the S button to move back one result in time.
    • Accu-Chek Active Blood Glucose MeterCleaning the meter: 
      Slide off the test strip guide towards you and clean it with cold water. Afterwards you may disinfect the test strip guide with 70 % alcohol. Wipe the measurement optics component with a soft lint-free cloth and/or a cotton swab, which may be slightly moistened with water or 70 % alcohol. Make sure all of the components are thoroughly dry before sliding the test strip guide back onto the meter.
  • Flagging test results: 
    You can flag test results to describe certain events connected to the result or particular characteristics of the result. You can only flag a test result while the test strip is still in the meter and the result is being displayed.
You can choose 4 flags
    • Accu-Chek Active Blood Glucose MeterBefore meals Flag(Full Apple Symbol): 
      Intended for test results that you have measured before meals
    • Accu-Chek Active Blood Glucose MeterAfter meals Flag(Apple Core Symbol): 
      Intended for test results that you have measured after meals
    • Accu-Chek Active Blood Glucose MeterGeneral Flag(Asterisk Symbol): 
      You can define the meaning of this flag yourself. For e.g. you can, use it for test results that you have obtained from alternative sites or after physical activities
  • Accu-Chek Active Blood Glucose MeterControl Flag(Bottle Symbol): 
    Intended for performance checks in which you apply control solution to the test field instead of blood

DSC01846 (Large) DSC01848 (Large) DSC01849 (Large) DSC01851 (Large) DSC01853 (Large) DSC01856 (Large) DSC01858 (Large) DSC01859 (Large) DSC01860 (Large) DSC01861 (Large) DSC01862 (Large) DSC01863 (Large) DSC01864 (Large) DSC01865 (Large) DSC01866 (Large) DSC01867 (Large) DSC01868 (Large) DSC01869 (Large) DSC01870 (Large) DSC01871 (Large) DSC01872 (Large)

Advertisements
 
Leave a comment

Posted by on December 17, 2013 in Others

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

 
%d bloggers like this: